bond驱动加载[ root @ compute1~ ] # vim/etc/modprobe.d/bond.conf # 开机自动绑定驱动alias bond0bondingoptionsbond0miimon=100 monding驱动alias bond0bondingoptionsbond0mimon首先文件/etc/sys config if CFG-bond0device=bond0type=以太网IP addr=183.239.106.186网络掩码=255.255.255.248网关=183.239.118 if CFG-eth0type=以太网设备=enp 5s 0f0on boot=yes boot proto=noneuserctl sys config/network-scripts/if CFG-et h1 type=以太网设备=enp 5s 0f1on boot=yes boot proto=noneuserctl=no master=boot network服务service network restert net/bonding/bond0 #将自动加载，显示当前bonding的状态modprobe -r bonding。 启用servicenetworkrestart#bond模式，最后bond0的启动状态http://www.Sina.com/http://www.Sina.com /