ENSP静态路由和VLANIF实例要求：1.配置静态路由以实现CP1和PC2的互操作1 .拓扑图
2.IP [ Huawei ] sys sw1 [ sw1 ] VLAN batch 23//两个VLAN info 3360 thisoperationmaytakeafewseconds.pleasewaitforamoment . dooood ipadd 192.168.2.124//IP [ sw1-vlanif2] int VLAN3[ sw1-vlanif3]构成ipadd 192.168.1.1.1 [ sw1 -千兆以太网配置端口类型[ sw1 -千兆以太网0/0/1 ] portdefaultvlan2////附加端口2 [ sw1 -千兆以太网0/0/2 ]端口链接-类型访问portdefaultvlan3[ Huawei ] syssself van batch 23 info : thisoperationmaytakeafewseconds.pleasewaitforamoment . done [ sw2 ] ipadd 192.168.3.124 [ sw2-vlanif2] int vlanif3[ sw2-vlanif3] ipadd 192.168.2.224 [ sw2-vlanif3] intg0/0/0 portdefaultvlan3[ sw2 -千兆以太网0/0/1 ] intg0/0/2[ sw2 -千兆以太网0/0/2 ] port link-type access [ SSS sys sw3 [ ar3 ] van batch 23 info : thisoperationmaytakeafewseconds.pleasewaitforamoment . done.[ ar3 ] int vlanif2[ ar3-ar3 ] ipadd 192.168.3.224 [ ar3-vlanif2] int VLAN3[ ar3-vlanif3] ipadd 192.168.4.124 [ ar3-vlanif3] intg0/0/1 portdefaultvlan2[ ar3 -千兆以太网0/0/1 ] intg0/0/2[ ar3 -千兆以太网0/0/2 ] port link-type access [ ar3 -千兆以太网0/2 ] sys ar1 [ ar1 ] intg0/0/0[ ar1-giga ar ] ipadd 192.168.4.224 [ ar1-gigabit以太网0/0/0 ] intg0/0/1[ ar1 ] 0/0 ] ipadd 192.168.5.224 [ ar2 -千兆以太网0/0 ] intg0/0/0/1[ ar2 -千兆以太网] sys ar3 [ ar3 ] intg0/0/0/0
3 .设置静态路由[ sw1 ] IP route-static 192.168.7.024192.168.2.2//目标地址掩码的下一跳[SW2] IP route-static 192.168.7.024192 IP route-static 192.168.1.024192.168.2.1 [ ar3 ] IP route-static 192.168.168.1 IP route IP route-static 192.168.7.024192.168.5.2 [ ar1 ] IP route-static 192.168.1.024192.168.4.4 [1]